Scope of supply:
1) Diesel Engine
2) Generator
3) Base
4) Silent speaker(Optional)
5) Waste heat recovery system(Optional)
6) Standard control panel
7) Ignition system, including: ECU, spark plugs, high voltage wire, ignition switch, ignition coil, wire.
8) Solenoid valve, flame arrestor, hand valve, pressure reducing valve, mixer
9) Radiator
10) Shock absorber
11) Air Filter, Oil Filter
12) 24V DC starter motor and cable
13) 24V charging alternator
14) Electric battery and connection line
15) Corrugated flexible exhaust pipe, flange, muffler
16) Documentation
Product Feature
1. Provide economic and flexible solutions to meet a wide range of customer specifications.
2. We have comprehensive warranty support and after-sales service.
3. Alternators of various specifications offer selectable engine starting capability, low reactance of 2/3 stage windings, low waveform distortion under nonlinear loads and fault compensating short circuit capability.
4. Provides complete Generator Set system integration, including remote automatic start/stop, precise frequency and voltage regulation, alarm and status information display, output metering.
Gensets parameters
| Rated power | 400KW |
| Rated speed | 1500 r/min. |
| Rated voltage | 400 V |
| Rated frequency | 50 Hz |
| Rated power factor | 0.8 |
| Supply method | 3 phases 4 lines |
| Excitation method | Brushless |
| Starting method | 24V DC Electric starter |
| Cooling method | Closed water cooled |
| Speed modulate method | Electronic control |
| Gas consumption rate | 0.29Nm³/KWh |
| Net weight (kg) | 2900 kg |
| Overall dimension L×B×H(mm) | 3800*1200*1650 (mm) |
Product Introduction
Our service
Parts
| Spare parts for 12V190 |
| No. | Part Name | Part Number | Qty |
| 1 | CYLINDER BLOCK ASSEMBLY |
| 1 |
|
|
| 1 |
| 3 | CYLINDER HEAD ASSEMBLY | 127.03.00 | 12 |
| 4 | OIL SUMP ASSEMBLY | 12VB.04.00B | 1 |
| 5 | PISTON AND CONNECTING ROD ASSEMBLY | 127.05.00 | 12 |
| 6 | CAMSHAFT AND GEAR TRAIN ASSEMBLY | 127.06.00 | 1 |
| 7 | TORSIONAL VIBRATION DAMPER ASSEMBLY | 12VB.07.00 | 1 |
| 8 | INTAKE LINE ASSEMBLY | 127.08.00B | 1 |
| 9 | EXHAUST LINE ASSEMBLY | 127.09.00A | 1 |
| 11 | NATURAL GAS PIPELINE | 127.14.00 | 1 |
| 12 | MEGNETO TRANSMISSION ASSEMBLY | 127.15.00 | 1 |
| 13 | OIL PUMP ASSEMBLY | 12V.17.00C | 1 |
| 14 | OIL FILTER ASSEMBLY | 12VB.18.00B | 1 |
| 15 | CENTRIFUGAL FILTER ASSEMBLY | 12VB.19.00 | 1 |
| 16 | LUBRICATING PIPING | 127.20.00 | 1 |
| 17 | OIL COOLER ASSEMBLY | 12VB.21.00 | 1 |
| 18 | WATER PUMP ASSEMBLY | 12VB.22.00B | 2 |
| 19 | Cooling line system | 127.24.00 | 1 |
| 20 | INTER-COOLER ASSEMBLY | 12V.27.00 | 1 |
| 21 | HAND PRIMING OIL PUMP ASSEMBLY | 12V.29.00 | 1 |
| 25 | OVERSPEED SAFETY DEVICE | 12VB.37J2.00 | 1 |
| 26 | SPECIAL TOOLS | 127.42.00 | 3 |
| 27 | COUPLING ASSEMBLY | 163.44.00 | 1 |
| 29 | ELECTRIC STARTING SYSTEM | 127.46D.00 | 1 |
| 30 | OIL PUMP BRACKET ASSEMBLY | 12VB.48.00 | 1 |
| 31 | CARBURETTER ASSEMBLY | 127.86.00 | 2 |
| 32 | NATURAL GAS PRESSURE REGALATING VALVE | 127.87.00 | 1 |
| 33 | GOVERNOR CONNECTION ASSEMBLY | 127.89.00 | 1 |
Company Profile
Our Certification
Export experience
Our products have been exported to more than 50 countries and regions. Sales and service centers have been established in Kazakhstan, Indonesia, the United Arab Emirates, Colombia and Nigeria, respectively, covering the entire market.
