Guohua power generators are designed to operate under extreme conditions with low operational and maintenance cost.
The 1200 Kw Gas Generator set is powered by the H16V190 engine, a highly intelligent, low heat consumption, highly reliable, low emission, long life 16V gas engine. It offers 38% power generation efficiency, low maintenance costs and can run for up to 8,000 hours per year.
| Model | four-valve, four-stroke, direct injection combustion chamber, water-cooled, supercharged intercooled, electronically control |
| Cylinder Arrangement | V Style, 60°
|
| Bore×Stroke (mm) | 190×215 |
| Piston Displacement(L) | 73.15 | 97.53 |
| Rated Speed(r/min) | 1000 | 1200 | 1500 | 1000 | 1200 | 1500 |
| Rated Power(KW) | 900 | 1000 | 1100 | 1320 | 1500 | 1800 |
| Heat Consumption(kj/kw.h) | ≤10000 | ≤9500 |
| Lubricant Consumption(g/kw.h) | ≤0.8 | ≤0.8 |
| Direction of Rotation | Counter-Clockwise(facing of flywheel) |
| A/F control | EGS electric control |
| Ignition Control | Digital ignition control |
| Starting Method | Compressed air start or DCR24V electric motor start |
| Fuel | Natural gas/Biogas/Coal gas(CBM) |
| Model of genset | 1200GF9-T2 |
| Model of engine | H16V190ZLT-2 |
| Rated speed(r/min) | 1000 |
| Rated power(kW/KVA) | 1200/1500 |
| Rated voltage(V) | 415/240 |
| Rated current(A) | 1391 |
| Rated frequency(Hz) | 50 |
| Rated power factor | 0.8 lagging |
| Voltage regulation | Automatic |
| Supply connecting | 3 phase 4wire |
| Governor | EGS-01/02 |
| Control model | Remote electric control, Hand control |
| Starting method | 24V DC electric starting motor |
| Cooling method | Water cooling system |
| Electrical efficiency | 38% |
| Heat Consumption | ≤ 9500kJ/kWh |
| Net weight(kg) | 15200 |
| Main Performance Index |
| Stable voltage regulation ratio | Single unit:±1% synchronized running:±2.5% |
| Instantaneous voltage regulation ratio | -15%~+20% UN |
| Overload | Run 1hour at 110% rated load(6hrs as cycle time) |
| Overcurrent multiples | 1.5IN,Time 2 minutes |
| Short-circuit current maintaining capacity | Excitation system can supply continuous current of three-times rated current, lasting 5s, alternator must offload. |
Gas Input and exhaust system
A stable and efficient gas input system ensures more efficient power generation. The gas input system uses a high-efficiency Air Filter, a high-flow Turbocharger and a round-tube intercooler. The heat discharge efficiency of the round tube intercooler radiator is 20% higher than that of a normal intercooler, which can meet the cooling requirements of the air stream. Effective exhaust system protection against heat radiation and hidden dangers. Due to the high exhaust temperatures, special insulation has been added to the exhaust manifold and turbocharger surfaces. The exhaust port is fitted with an expansion piece to reduce the failure rate and prevent the release of heat into the generator room.
1. EGS engine intelligent management system.
2. International advanced air-fuel ratio control technology, TECJET air-fuel ratio automatic adjustment.
3. High-flow high-pressure intake system, which can adapt to a wide range of concentration changes.
4. Low pressure intake and lean combustion control technology for low pressure gases and better emissions.
5. Advanced genset management module (automatic IG-NT synchronisation, automatic load distribution).
6. Digital monitoring technology, complete monitoring of engine thermal parameters and electrical parameters of the genset.
7. Distributed energy systems: electro-thermal system, electro-thermal-cooling system.
JiNan GuoHua Green Power Equipment Co.Ltd, is professional production in Diesel Generator Sets, Gas Generator sets and parts for nearly 12 years, covering production, sales and maintenance, having SGS general notary certificate,etc. At present, we have formed a perfect sales and maintenance sreveice system. And have set up two workingroom, covering an area of more than 5,000 square meters.
Integrated OEM: Unit sets, combined cooling, heating and power generation, gas treatment, remote centralized control transformation.
Power station maintenance and transportation: equipment repair, regular maintenance, long-term maintenance and transportation.
All-in-one service: project consultation, scheme design, equipment commissioning, spare parts supply, medium and major repair, complete machine and parts remanufacturing.
